This blog post gives an overview of how I’ve configured the buttons of my Logitech Harmony 785 remote control to work with yaVDR 0.3.0a and the integrated IR receiver of my Antec Fusion Remote HTPC enclosure. Read my previous post about how to set up the yaVDR 0.3.0a system to use the enclosure’s integrated IR [...]
Read more…Posts Tagged ‘VDR’
yaVDR 0.3.0a & Asus M3N78-EM: ACPI-WakeUp Howto
Here are the step by step instructions to set up ACPI-WakeUp for an Asus M3N78-EM mainboard and yaVDR 0.3.0a: Disable “Power On By RTC Alarm” in the BIOS settings (Power > APM Configuration). Edit /etc/vdr/vdr-addon-acpiwakeup.conf: ACPI_ENABLED=yes Edit /etc/default/rcS: UTC=yes Create the custom template /etc/yavdr/templates_custom/etc/default/grub/10_main (you may have to create the directories under /etc/yavdr/templates_custom)*: GRUB_DEFAULT=saved GRUB_HIDDEN_TIMEOUT=0 [...]
Read more…VDR: Logitech Harmony Remote 785 & Antec Fusion Remote Black
Update 2011-04-22: In this blog post, you find a detailed overview of the remote control’s button configuration I’m using for my yaVDR system. When setting up my HD VDR system I struggled with my Logitech Harmony 785 to get the remote control work with the built-in IR receiver of the Antec Fusion Remote HTPC enclosure. [...]
Read more…yaVDR 0.3.0a: Antec Fusion Remote Black LCD and IR receiver configuration
Here is a short summary how I configured my yaVDR 0.3.0a system to work with the LCD and IR receiver that are integrated in the Antec Fusion Remote HTPC enclosure (here is a complete overview of my hardware configuration). Install the imonlcd plug-in: # sudo apt-get install vdr-plugin-imonlcd Use the following settings (System > Remotes [...]
Read more…yaVDR 0.3.0a: Activate NoAd add-on to automatically scan for commercials
The default yaVDR 0.3.0a installation already includes the NoAd VDR add-on, but the add-on is not activated by default. The following command (re)runs the NoAd setup and enables you to activate the add-on: # sudo dpkg-reconfigure vdr-addon-noad # sudo restart vdr From now on, the NoAd program will run for each new recording and will [...]
Read more…yaVDR 0.3.0a & Asus M3N78-EM: NVRAM-WakeUp Howto
Update 2010-12-27: I’ve published a step by step instructions how to use ACPI for automatic wake-ups for an Asus M3N78-EM mainboard and yaVDR 0.3.0a. The ACPI method is easier to setup and does not need an additional reboot. Here are the step by step instructions to set up NVRAM-WakeUp for an Asus M3N78-EM mainboard and [...]
Read more…